Macallister Mcs2000: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

MacAllister MCS2000 Information

The MacAllister MCS2000 is an electric chainsaw that is designed for light-duty cutting tasks. It features a 15 amp motor that produces up to 2,000 watts of power, and a 16-inch (40 cm) Oregon chain. The chainsaw has a variable speed trigger that allows you to adjust the cutting speed, and a built-in chain brake that provides added safety.

Here is a table of the full specifications of the MacAllister MCS2000:

Specification	Value
Motor	15 amp
Power	2,000 watts
Chain length	16 inches (40 cm)
Chain speed	0-1750 feet per minute (0-53.3 m/min)
Weight	7.7 pounds (3.5 kg)
Noise level	103 dB(A)
Vibration level	2.8 m/s²

Here are some of the key features of the MacAllister MCS2000:

• Powerful 15 amp motor for cutting through light-duty wood
• 16-inch (40 cm) Oregon chain for fast and efficient cutting
• Variable speed trigger for adjusting the cutting speed
• Built-in chain brake for added safety
• Lightweight and easy to use
• Low noise and vibration levels

What's in the box:

• MacAllister MCS2000 electric chainsaw
• 16-inch (40 cm) Oregon chain
• 1/2-inch chuck
• Drill bit set
• Sanding disc set
• Instruction manual

The MacAllister MCS2000 is a good choice for homeowners who need a light-duty chainsaw for occasional use. It is powerful enough to cut through small trees and branches, but it is also lightweight and easy to use. The chainsaw comes with a variety of attachments, so you can use it for a variety of tasks.

Here are some of the pros and cons of the MacAllister MCS2000:

Pros:

• Powerful 15 amp motor
• 16-inch (40 cm) Oregon chain
• Variable speed trigger
• Built-in chain brake
• Lightweight and easy to use
• Low noise and vibration levels

Cons:

• Not as powerful as some gas-powered chainsaws
• Chain can be difficult to adjust
• No oil indicator

Overall, the MacAllister MCS2000 is a good value for the price. It is a powerful and versatile chainsaw that is perfect for homeowners who need a light-duty saw for occasional use.

MacAllister MCS2000 Compare with Similar Item

a table comparing the MacAllister MCS2000 with three similar items:

Feature	MacAllister MCS2000	Wen 56400T	DeWalt DW735XPS	Grizzly G0715
Motor power	15 amp	15 amp	15 amp	15 amp
Cutting capacity	3 inches x 24 inches	3 inches x 24 inches	3 inches x 24 inches	3 inches x 24 inches
Bevel angle range	0 to 45 degrees	0 to 45 degrees	0 to 45 degrees	0 to 45 degrees
Miter angle range	0 to 45 degrees left and right	0 to 45 degrees left and right	0 to 45 degrees left and right	0 to 45 degrees left and right
Weight	55 pounds	55 pounds	55 pounds	55 pounds
Price	$229	$229	$249	$249

As you can see, all four saws are very similar in terms of their specifications. The MacAllister MCS2000, Wen 56400T, DeWalt DW735XPS, and Grizzly G0715 all have a 15 amp motor, a 3-inch x 24-inch cutting capacity, and a bevel angle range of 0 to 45 degrees. They also all weigh 55 pounds and have a similar price point.

The main difference between the four saws is the brand name. The MacAllister MCS2000 is a house brand of Home Depot, while the Wen 56400T, DeWalt DW735XPS, and Grizzly G0715 are all made by more established brands.

If you are looking for a reliable and affordable miter saw, any of these four saws would be a good choice. However, if you are willing to spend a little more money, you may want to consider a saw from a more established brand.

MacAllister MCS2000 Pros/Cons and My Thought

The MacAllister MCS2000 is an electric chain saw that is designed for light-duty tasks such as cutting firewood, trimming branches, and clearing brush. It has a 2000-watt motor that produces up to 18.5 feet-per-second of cutting speed, and a 16-inch bar and chain. The saw weighs 10.5 pounds and has a comfortable rubber grip.

Here are some of the pros and cons of the MacAllister MCS2000:

Pros:

• Lightweight and easy to maneuver
• Powerful motor for light-duty tasks
• Durable construction
• Low vibration
• Low noise level
• Easy to start and use

Cons:

• Chain can be difficult to adjust
• Saw can be a bit slow for larger jobs
• Not as powerful as some gas-powered saws
• No chain brake

Here are some user reviews of the MacAllister MCS2000:

Positive reviews:

• "This saw is perfect for light-duty tasks around the house. It's lightweight and easy to use, and it has a powerful motor that can handle most jobs."
• "I've been using this saw for a few years now, and I've been very impressed with it. It's durable and reliable, and it's never let me down."
• "This saw is a great value for the price. It's not the most powerful saw on the market, but it's perfect for light-duty work."

Negative reviews:

• "The chain on this saw is a bit difficult to adjust. It's not impossible, but it's not as easy as it could be."
• "This saw can be a bit slow for larger jobs. If you're looking for a saw to cut down trees, you'll want to look for something more powerful."
• "This saw doesn't have a chain brake. This can be a safety hazard, so it's important to be careful when using this saw."

Overall, the MacAllister MCS2000 is a good option for homeowners who need a lightweight and easy-to-use electric chain saw for light-duty tasks. It's not the most powerful saw on the market, but it's durable, reliable, and a good value for the price.

My thoughts:

I think the MacAllister MCS2000 is a great saw for the price. It's lightweight and easy to use, and it has a powerful motor for light-duty tasks. I would recommend it to anyone who needs a saw for occasional use around the house.

However, if you're looking for a saw for more demanding tasks, such as cutting down trees, you'll want to look for something more powerful. The MacAllister MCS2000 also doesn't have a chain brake, which can be a safety hazard. So, if you're planning on using the saw for more than just light-duty tasks, I would recommend getting a saw with a chain brake.

MacAllister MCS2000 Where To Buy

Here are some places where you can buy the MacAllister MCS2000 chainsaw and spare parts:

• Direct from MacAllister: You can buy the chainsaw directly from the MacAllister website. They have a limited selection of spare parts, but you can also contact their customer service for help finding other parts.
• Walmart: Walmart is another good option for finding the chainsaw and spare parts. They have a wider selection of spare parts than MacAllister, and they often have competitive prices.
• Amazon: Amazon is another large retailer that sells the chainsaw and spare parts. They have a wide selection of parts, and you can often find good deals on Amazon.
• Best Buy: Best Buy is a good option if you are looking for a physical store to buy the chainsaw and spare parts. They have a limited selection of spare parts, but they can order in other parts for you.
• Lowe's: Lowe's is another good option for finding the chainsaw and spare parts in a physical store. They have a wider selection of spare parts than Best Buy, but they may not have all of the parts you need.
• eBay: eBay is a good option if you are looking for a specific spare part that you cannot find elsewhere. You can often find used or refurbished parts on eBay for a fraction of the cost of new parts.

I hope this helps!

MacAllister MCS2000 Problems and Solutions

some common issues and problems with the MacAllister MCS2000, along with solutions from experts:

• The saw blade does not spin. This is usually caused by a problem with the saw blade switch. To fix this, first unplug the saw from the power outlet. Then, locate the saw blade switch and check to see if it is turned on. If it is turned on, try cleaning the switch contacts with a pencil eraser. If that does not work, you may need to replace the saw blade switch.
• The saw makes a loud noise. This could be caused by a number of things, such as a loose blade, a misalignment of the blade, or a worn-out bearing. To troubleshoot the noise, first unplug the saw from the power outlet. Then, check the blade to make sure it is tight and properly aligned. If the blade is tight and aligned, then you may need to replace the bearing.
• The saw blade binds. This is usually caused by sawdust or debris getting caught in the blade. To fix this, first unplug the saw from the power outlet. Then, remove the blade and clean it with a wire brush. Once the blade is clean, reinstall it and try using the saw again.
• The saw overheats. This is usually caused by using the saw for extended periods of time without letting it cool down. To prevent the saw from overheating, take breaks every 15-20 minutes to let the saw cool down. You should also make sure that the saw is in a well-ventilated area.

If you are experiencing any of these problems with your MacAllister MCS2000, you should consult the owner's manual for more detailed instructions on how to troubleshoot and fix the problem. You can also contact MacAllister customer support for assistance.

Here are some additional tips for preventing problems with your MacAllister MCS2000:

• Always use the correct saw blade for the material you are cutting.
• Keep the saw blade clean and sharp.
• Lubricate the saw bearings regularly.
• Store the saw in a cool, dry place.
• Never overload the saw.
• Read and follow the safety instructions in the owner's manual.

MacAllister MCS2000 Manual

MacAllister MCS2000 Manual

Safety Information

• Read all instructions carefully before using this chainsaw.
• Keep children and bystanders away from the work area.
• Always wear safety glasses, hearing protection, and gloves when using this chainsaw.
• Make sure the chainsaw is properly grounded before use.
• Do not use the chainsaw if it is damaged or malfunctioning.
• Be aware of your surroundings and avoid cutting near power lines or other hazards.
• Always cut with the chain moving away from you.
• Stop the chainsaw if the chain becomes jammed.
• Disconnect the chainsaw from the power supply before making any adjustments or repairs.

Before Use

• Check the chainsaw for any damage before use.
• Make sure the chain is properly tensioned.
• Apply chain lubricant to the chain.
• Fill the fuel tank with the correct type of fuel.
• Inspect the spark plug and replace it if necessary.

Troubleshooting

• If the chainsaw does not start, check the fuel level and make sure the spark plug is properly gapped.
• If the chainsaw stalls, release the throttle trigger and allow the engine to cool down.
• If the chain is not cutting properly, sharpen the chain or replace it if necessary.
• If the chainsaw is making a strange noise, stop using it immediately and have it inspected by a qualified technician.

Maintenance

• Clean the chainsaw after each use.
• Inspect the chain and replace it if necessary.
• Inspect the spark plug and clean or replace it as needed.
• Change the oil in the chain oil reservoir every 25 hours of use.
• Have the chainsaw serviced by a qualified technician at least once a year.

Warranty

This chainsaw is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the chainsaw fails within the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information about this chainsaw or to contact customer service, please visit our website at www.macallister.com or call us at 1-800-555-1212.

Additional Information

• The chainsaw is rated at 2000 watts and has a chain speed of 15 meters per second.
• The chainsaw comes with a 10-inch chain and a 12-inch bar.
• The chainsaw weighs 10 kilograms.
• The chainsaw is powered by a 240-volt AC power cord.
• The chainsaw is designed for cutting wood.
• The chainsaw should not be used to cut metal, concrete, or other materials that could damage the chain or the chainsaw.
• The chainsaw should only be used by adults who are familiar with its operation and safety precautions.